The pot cover takes the form of auto-move-up-and-down. The material in water pot and oil pot is sucked into emulsifying pot in vacuum by transmission pipes.The emulsifying pot is designed to be tilted over in case to dump products. The material can be heated byelectrical heater with help of heat-conductive medium it can also heated by gas. The heat temp can be set and automatically controlled. Material cooling is available. It is easy to operate. There is temperature- keeping sheet betweer inner and out sheath Different stirring modes can be used simultaneously or individually.All the processes of crushing, emulsifying, mixing, stirring and dispersing can be accomplished within a shorttime. The area touching working material is made of stainless steel(Commonly used 304, medical 316L ),With inner surface polished, the vacuum stirring equipment meets the need of hygiene and are manufactured in accordance with GMP standard. It is best for the production of ointment,cream, etc.
The materials are heated and mixed in water pot and oil pot to be fully reacted. Sucked into emulsifying pot by vacuum pump, the materials are stirred by both the center blade and side scraper, which works on the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, folded. Then, the materials are sent to the cut-off mixing until where they are finally crushed into small peelets of 200um~2um. Besodes. because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material.
|Emulsifying Pot||Design Volume(L)||6||12|
|Scraper Stirring Power(kw)||0.18||0.18|
|Scraper Stirring Speed(kw)||10~120||10~120|
|Cut-off Mixing Power(kw)||0.55||0.55|
|Cut-off Mixing Diameter()||50||50|
|Cut-off Mixing Speed(rpm)||1000~3300||1000~3300|
|Water Pot||Design Volume(L)||3||6|
|Oil Pot||Design Volume(L)||3||6|